SINGLE CORNER WELDING MACHINE
Used in velding of PVC profiles. Back fences with
incremental scales esaily adjustable to weld corners from 30-180 .PLC contorller makes possible
regualting temperature and time of welding process. Operations are under full automatic program
control. Welding process with one moving table Instant display of heater plate temperature. Facility
of pressing profiles pedal each time. Feature to a
| Standart Voltage | 220 V |
| Frequency | 50 Hz |
| Total Power | 1.5 Kw |
| Air Pressure | 5 Bar Min. |
| Air Consumption | 2.30 Lt. Min. Sec. |
| Machine Width | 760 mm |
| Machine Length | 650 mm |
| Machine Height | 1400 mm |
| Machine Weight | 175 Kg |
| Profile Height | 125 mm |
| Profile Widht | 225 mm |
DOUBLE CORNER O MM WELDING MACHINE
Used for welding PVC profiles both corners at
the same time. Welding can be done in one opertaion at 2×90 santigrad controlled by full automatic PLC system. Right head can move easily
on ball bearing system. Heating system controlled by full automatic digital system. There is
pressure control for welding and profile clamping cylinders. Fixed head can be used for welding at different angles between 30 santigrad and
180 santigrad
AUTOMATIC CORNER CLEANING MACHINE
Used for corner cleaning of PVC profiles after
welding. Cleans upper bottom and exterior surfaces of the corner. It divides into surface and corner
cleaning for acrylic profiles. Centralizes window
frame before the cutting operation. PLC system
makes easy to use this machine. 4 different types
of knives can be settled.
AUTOMATIC END MILLING MACHINE
It is a milling machine designed to delicately document the profiles of PCV and aluminum profiles.
Thanks to the auxiliary button, it can move up to 3 sequences.
It can produce super fast with one button.
AUTOMATIC GLAZING BEAD SAW
Cuts single or double glassing laths quickly
and efficiently. Cuts PVC laths at 45 degrees. Fully automatic with adjustabla saw
speed. Includes precision lath measuring
equipment. Pneumatic profile clamping
device. 2 double blades (2 with bigger diameter, 2 with smaller one-for cutting bottom
corner of lath) are used.
