One of the two corners of the PVC profiles is a stationary two-headed fully automatic program controlled PLC machine. Welding and profile pressures are set separately. A corner can be grade welded. Maximum welding strength, welding time approx. 75 seconds, max. Profile height 150 mm ‘quick exhaust valve system’ for overpressure pistons support for long profile, long life welding resistance and easy to change single piece teflon. All parameters can be set individually. Practical welder replacement system has a protection system that prevents the machine from operating at low air pressure.
It is an automatic mitre saw. Suitable for cutting PVC and
Aluminum profiles – Exists stoppers for 15-22.5-30-45-90 cutting
om right and left sides. Saw blade moving adjustability. Cutting
operations between 0-180. Pneumatic profile clamping system.
Diamond Saw blade daimeter is 450 mm. Also includes rights and
left side conveyor system for already cutted and uncutted profiles
(optianally ) Cooling unit for slumium profiles (optianally).
It is a double corner cutting machine which can cut both sides of PVC and aluminum profiles at the same time. Saws can be changed and cut in wood. Both heads cut 45 or 90 degrees and the openings are automatically adjusted. Cutting can be done at any time. Also refer to the Operating Manual for the electronic panel. Machine saw blade diameter 450 mm Maximum cutting length 3200 mm Minimum cutting length 485 Electricity and air consumption are very economical.